BM85060FV (新製品)
CRM Totem Pole PFC Controller IC
BM85060FV (新製品)
CRM Totem Pole PFC Controller IC
The BM85060FV is a critical conduction mode (CRM) power factor correction (PFC) controller IC designed to drive a bridgeless totem pole PFC topology. Bridgeless totem pole PFC consists of two totem pole legs: a fast-switching leg driven at high switching frequencies and a second leg operating at AC line frequency. This topology eliminates the need for a diode bridge, which is essential in conventional PFC circuits, and significantly improves efficiency and power density.
主な仕様
特性:
Controller Type
PFC
Channel
1
Zero Detect
Auxiliary Winding
W/W Input IEC61000-3-2 Class-C Support
No
Vin1 (Typ.)[V]
2.5
Reference Voltage Accuracy (%)
2
Brown Out
Yes
VCC Discharge
Yes
OVP System
2 way
FET
-
VS Pin Over Voltage Protection (L/A)
Auto Restart
Vin1(Max.)[V]
36
VS Dynamic OVP (L/A)
Auto Restart
VS Short Protection (L/A)
Auto Restart
VCC OVP
Yes
BR PIN
No
SW Frequency (Max.)[kHz]
1000
Light Load mode
Yes
EN
No
Soft Start
Yes
Thermal Shut-down
Yes
Under Voltage Lock Out
Yes
Operating Temperature (Min.)[°C]
-40
Operating Temperature (Max.)[°C]
125
Package Size [mm]
6.5x6.4 (t=1.45)
特長:
- Critical Conduction Mode (CRM) and Discontinuous Conduction Mode (DCM) Operation
- Burst Mode Operation at Very Light Loads
- Brownout Detection
- X Capacitor Discharge Function
- High Voltage Startup
- Dynamic Response Enhancer
- Protections
- Output Over Voltage Protection (Fast Over Voltage, Second Over Voltage)
- Output Under Voltage Protection (UVP)
- Input Over Voltage Protection (VAC OVP)
- Overload and Peak Current Limit Protection (Peak Current Limit, Soft Over Current)
- Inrush Current Limit
- Open Loop Detection
- Internal TSD
- AC Voltage Sudden Change Detection
- Negative Over Current Limiter
リファレンスデザイン / アプリケーション評価キット
-
- Evaluation Board - BM85060FV-EVK-001
Totem Pole PFC Controller Output 330W 390V BM85060FV Reference Board
