Rohm Breadcrumb

Rohm Productdetail

USB Type-C Power Delivery Controller - BM92A14MWV

BM92A14 is a full function USB Type-C Power Delivery (PD) controller that supports USB Power Delivery using base-band communication. It is compatible with USB Type-C Specification and USB Power Delivery specification. BM92A14 includes support for the PD policy engine and communicates with an Embedded Controller or the SoC via host interface. It supports SOP, SOP’ and SOP’’ signaling, allowing it to communicate with cable marker ICs, support alternate modes.

* 本製品は、STANDARD GRADEの製品です。車載機器への使用は推奨されていません。
形名 | BM92A14MWV-ZE2
供給状況 | 供給中
パッケージ | UQFN40V5050A
包装数量 | 2500
最小個装数量 | 2500
包装形態 | テーピング
RoHS | Yes

特性:

入力電圧 (Min.) [V]

3.1

入力電圧 (Max.) [V]

20.0

ポリシーマネージャー

Integrated

Power Role

Consumer

Data Role

UFP

Alternate Mode

No

Dead Batteryサポート

Yes

接続時要求初期電圧

9V

動作温度範囲(Min.)[°C]

-30

動作温度範囲(Max.)[°C]

105

特長:

  • USB Type-C Specification compatible
  • USB PD Specification compatible (BMC-PHY)
  • Connected the required initial voltage is 9V
  • Request current depends on the far-end device
  • Start of automatic power receiving without Ext-MCU
  • Two channel power path control using N-channel MOSFET drivers with back flow prevention
  • Type-C cable orientation detection
  • Built-in VCONN Switch and VCONN controller
  • Direct VBUS powered operation
  • Initial Role is UFP mode (Supports DFP/DRP mode)
  • Supports Dead Battery operation
  • SMBus Interface for Host Communication