Downloading...

Digital Synchronous Buck Controller with Auto-Control® & SMBus™/PMBus™ - PV3101

The PV3101 is a digital synchronous buck controller with adaptive loop compensation, for point-of-load (POL) applications. The output can supply 0.6 V to 5.5 V, and can be configured and controlled via PMBus, with a single resistor, or through programming stored in the non-volatile memory (NVM).

With Powervation’s Digital Stress Share (DSS) and PLL synchronization, multiple PV3101 devices may be used in parallel to increase the number of phases supporting the application’s load. PV3101 uses Powervation’s proprietary adaptive digital control loop, Auto-Control, which adapts on a cycle-by-cycle basis, and provides active loop compensation to stabilize the control loop.

The digital functionality of this PMBus power converter controller allows system telemetry (remote measurement and reporting) of current, voltage, and temperature information. Additionally, to maximize system performance and reliability, the IC provides temperature correction/compensation of several parameters. PV3101 is a fully protected DC/DC solution that utilizes analog and digital functionality to maximize protection of the system.

Full Data Sheet (Login Required for Approved Access)

在庫確認 
現在ネット商社在庫がございませんのでお問い合わせください→ お問い合わせ
* 本製品は、STANDARD GRADEの製品です。車載機器への使用は推奨されていません。
形名
供給状況
パッケージ
包装数量
最小個装数量
包装形態
RoHS
PV3101 供給中 VQFN32V5050V 2500 2500 テーピング Yes
 
特性:
Phase Count 1
QFN Package 5 mm x 5 mm
Supply Voltage 0.6 V to 5.5 V
Controller Biad 3.3
Interface SMBus PMBus™ Compliant
Interface SVID N/A
Interface Parallel VID N/A
Auto-Compensation Auto-Control®: Real-Time Adaptive Auto-Tuning
Programmable Fsw 375 kHz - 1 MHz
Phase Add/Drop N/A
DSS® Yes
Single Pin CONFIG™ 8 Tables
VSET Yes
VTRACK Yes
ADDR Yes
System Good Yes
Sensors / Precision Telemetry Voltage VOUT, VIN, IOUT, EOUT
Sensors / Precision Telemetry Tsense Supported Internal Die Sense & External
Fault Response OVP Restart / Latching
Fault Response OCP Restart / Latching
Fault Response SCP Retry
Fault Response LOS Retry
Fault Response OTP Retry
Fault Response Phase Loss N/A
SCP Temp Compensation No
Support NTC Sensor No
Configurable SALRT No
Programmable Load-Line No
Integrator Gain Scalar No
Operating Temperature (Min.)[°C] -25
Operating Temperature (Max.)[°C] 85
特長:
  • • Auto-Control Real-Time Adaptive Loop Compensation
    • SMBus Interface with PMBus Power System Management Protocol
    • Precision Measurement & Telemetry Reporting: VOUT, IOUT, VIN, EOUT, Temperature, Duty Cycle, fSW
    • Programmable Protection & Warning
    − Output OVP, OCP, SCP, LOS, UV Warning
    − Input UVLO, OVLO
    − Internal & External OTP, UT Warning, & OT Warning
    • Single-Pin Configuration with Eight Profile Tables
    • Power Management and Conversion
    − VOUT Range: 0.6 V to 5.5 V
    − ±0.5% VOUT, ±1.5% VIN, & ±3% IOUT Accuracy Over Temperature
    − Digital Stress Share® (DSS) Bus for Multi-POL & ≥2ɸ Operation
    − Programmable Frequency (375 kHz to 1 MHz)
    − Programmable VOUT, Voltage Tracking, Margining, & Sequencing
    − Frequency Synchronization & Phase Alignment
    − Programmable Precision Duty Cycle Limit
    − Power Good, System Good, & Remote Power Down
    • Internal Anti-Fuse Based NVM
    − -40°C to 125°C (20 year data retention rating)
    • 32-Lead 5 mm x 5 mm QFN package (RoHS/PbF)