Downloading...

Advanced 12 Channel Constant Current LED Driver IC - BD18378EFV-M (新製品)

The BD18378EFV-M is a serial input controlled constant current LED driver with 8 V output rating. 6 bit current calibration is available for each output while a selected PWM input performs dimming on the corresponding output. The BD18378EFV-M is able to perform diagnostic (open / short / temperature) checks to detect LED failure and over temperature on chip. Fault detection is performed also during LED deactivated state. The settings of all internal registers can be read out to verify written information at any time.

形名
供給状況
パッケージ
包装数量
最小個装数量
包装形態
RoHS
BD18378EFV-ME2 供給中 HTSSOP-B28 2500 2500 テーピング Yes
 
特性:
形態 Constant Current
出力数 12
調光 PWM
1chの電流(Max.)[mA] 50.0
Vout(Max.)[V] 8.0
Vin(Min.)[V] 3.0
Vin(Max.)[V] 5.5
動作温度範囲(Min.)[°C] -40
動作温度範囲(Max.)[°C] 105
特長:
    • Current capability: 50mA per output channel.
    • 4-line SPI Control.
    • External resistor current setting.
    • Limp Home capability.
    • PWM dimming 0.2-99.2% at 200Hz
    • Diagnostic of all PWM inputs.
    • Programmable output mapping to each PWM input.
    • 6 Bit LED brightness adjustment on each channel.
    • Diagnostic output on LED OPEN and SHORT for each channel during PWM on & off time.
    • True LED voltage measurement.
    • Over Temperature Protection and Thermal Feedback.
    • Open Drain Fault indicator.
    • Read-back of all register settings.
    • Outputs can be connected in parallel to achieve more than 50mA into the load.
    • Slew Rate limited switching reduces radiated Noise (EMI).
    • Daisy chain compatible.
    • AEC-Q100 qualified.
 
 
 
ロームはいかなる時も仕様を変更する権利を有します。
 
技術資料
汎用ICベストセレクション

ロームの汎用ICカタログ

形名の構成

For ICs